Latest

Kesheng news

Release time:

2022/07/26

Passed the IATF16949 quality system certification in September 2015


Since its establishment, Kesheng has been deeply engaged in the field of precision machining, constantly introducing advanced equipment and technology at home and abroad, and passed the IATF16949 quality system certification in September 2015.

Industry news


Release time:

2022/08/27

What is the motor shaft extension and how to determine the diameter of the motor shaft

For the motor shaft processing manufacturer Wuxi Lianyuanda, its main products are the motor shaft and shaft processing. Therefore, let's study and understand the motor shaft in this area, so that you can learn The goal, in turn, can come to know and understand this one more about the motor shaft.

What is the motor shaft extension and how to determine the diameter of the motor shaft

Release time:

2022/08/27

Matters needing attention in micro-motor brushes

After the brushes of the micromotor are worn out, they should be replaced according to the manufacturer's regulations. When replacing part of the brushes, it must be ensured that the brushes of the entire micromotor are of the same grade. Because if the grades of the brushes are different, the current distribution between the brushes will be uneven. If there is no brush with the same brand as the original, all the brushes of the whole machine need to be replaced. ​​

Matters needing attention in micro-motor brushes

Release time:

2022/08/27

Geared motor maintenance knowledge

1. Check the size and change of the working current of the motor during daily inspection.

Geared motor maintenance knowledge

Release time:

2022/08/27

Structural Analysis of DC Motors

The structure of the DC motor should be composed of two parts: the stator and the rotor. The stationary part of the DC motor is called the stator. The main function of the stator is to generate a magnetic field. The part that rotates during operation is called the rotor. Its main function is to generate electromagnetic torque and induced electromotive force. It is the hub for the energy conversion of the DC motor, so it is usually called the armature. Constructor and fan, etc.

Structural Analysis of DC Motors
< 123 >