Latest
Kesheng news
Release time：
2022/08/27
A feeding device for the manufacture and processing of electric tool shaft parts and its use method and process
A power tool is a tool based on electricity as a power source. There are usually electric drills, electric hammers, electric saws, etc. Each electric tool is composed of multiple parts, and each part needs to be processed. A feeding device is needed for feeding; however, the existing feeding devices for the manufacture and processing of electric tool shaft parts have certain shortcomings that need to be improved. First, the existing feeding devices for the manufacture and processing of electric tool shaft parts are The device cannot arrange the shaft parts regularly, which requires manual operation. On the one hand, it affects the feeding speed, and on the other hand, it wastes manpower, which is not conducive to use. Secondly, the existing feeding device for the manufacture and processing of shaft parts of electric tools cannot be used. The adjustment of the blanking space cannot be applied to power tool shaft parts of various diameters, and the scope of application is small. In addition, the existing feeding device for the manufacture and processing of power tool shaft parts cannot adjust the blanking speed. It is suitable for various processing situations and has high limitations.
Industry news
Release time：
2022/08/27
What is the motor shaft extension and how to determine the diameter of the motor shaft
For the motor shaft processing manufacturer Wuxi Lianyuanda, its main products are the motor shaft and shaft processing. Therefore, let's study and understand the motor shaft in this area, so that you can learn The goal, in turn, can come to know and understand this one more about the motor shaft.
Release time：
2022/08/27
Matters needing attention in micro-motor brushes
After the brushes of the micromotor are worn out, they should be replaced according to the manufacturer's regulations. When replacing part of the brushes, it must be ensured that the brushes of the entire micromotor are of the same grade. Because if the grades of the brushes are different, the current distribution between the brushes will be uneven. If there is no brush with the same brand as the original, all the brushes of the whole machine need to be replaced.
Release time：
2022/08/27
Geared motor maintenance knowledge
1. Check the size and change of the working current of the motor during daily inspection.
Release time：
2022/08/27
Structural Analysis of DC Motors
The structure of the DC motor should be composed of two parts: the stator and the rotor. The stationary part of the DC motor is called the stator. The main function of the stator is to generate a magnetic field. The part that rotates during operation is called the rotor. Its main function is to generate electromagnetic torque and induced electromotive force. It is the hub for the energy conversion of the DC motor, so it is usually called the armature. Constructor and fan, etc.
Welcome Counseling
Contact us
No. 1 Zhangjia Industrial Zone, Shangtian Town, Fenghua District, Ningbo City, Zhejiang Province
Domestic trade
International trade
